Thalia Hibiscus Wit

Yes it's been almost a year since my last post, but it seemed fitting to revive this blog from the doorstep of death by posting my first homebrew label in a year and a half.

Thalia is a Beligian Witbier infused with hibiscus flowers, a combination pioneered by Dieu du Ciel! brewery in Montreal, Quebec. When Bailie and I went to Canada on vacation last year, Bailie developed a fondness for the beer, which is only sold as close as Charlottesville. During this year's vacation to Charleston, SC and other points south, we wound up in a spice shop which sold the dried hibiscus flowers by the ounce. Recognizing this as a great opportunity to try my hand at a hibiscus wit, I bought an ounce of the flowers to take home.

When I brewed this beer at Learn to Homebrew Day at Blue Ridge Hydroponics and Homebrew Supplies, my initial thought was to add half of the flowers towards the end of the boil to pull out aromatics, but it didn't seem like enough after grinding the whole flowers down to a powder. I decided to throw the rest in and see how it tasted after fermentation. Still lacking the pungent, floral, perfumy aroma and flavor I was looking for after 3 weeks in the fermenter, I started looking around for more hibiscus to infuse more flavor in the beer. Luckily, I found some just down the street at Roanoke Natural Foods Co-op.

The best way to add flavor and aroma post-fermentation is to create a tincture by soaking the dried flowers in vodka for several days or weeks, drawing a sample and adding small amounts with an eye dropper to that sample until the desired product is reached. You then figure out the number of teaspoons of tincture these drops for the sample produced, and finally scale that up for a 5 gallon batch and add at bottling time. In my case, I found that I needed to add 10 teaspoons of the strong potion (1.67 oz) to attain the desired character. This small amount of vodka adds only about .09% alcohol to the 5 gallon batch.

Intended to be a 5% alcohol beer, my brewhouse efficiency (amount of sugars produced after mash, sparge and boil) and attenuation (% of sugars eaten by yeast during fermentation) were so high that it wound up at 5.66% after fermentation. Add the vodka tincture to that, and you have a nice even 5.75% ABV.

Thalia is the Greek muse of comedy. I liked the name and found it fitting for this girly beer. Going with the comic theme, the label depicts Thalia farting on a Venusian volcano, causing it to spew hibiscus flowers into the atmosphere. Need I say more?

Ryezome Label

After a lengthy hiatus, the creative bug bit me again and I made another beer label for my latest homebrew, a hoppy brown rye ale. I settled on Ryezome as the name, a reference to the 3 pounds of rye used in the recipe, and rhizomes, the rootstalks of certain plants such as hops, that grow under ground and act as a liaison of sorts between the roots and shoots of plants. The label is just a representation of an image that popped into my head when daydreaming about the beer. I liked the idea of a root system being torn out of the ground by something as unassuming as a hot air balloon, and I found it fitting for both the style of the beer and the title. 'Nuff said. :)

The beer itself was originally supposed to be a hoppy amber rye ale, but while ProMash claims the color is well within guidelines for an amber, anyone who looks at it would immediately think brown, so I'm going with that. Since its right here in front of me, I might as well throw the recipe out there:

6 lb 2-row Pale Ale malt
3 lb Munich malt
3 lb Rye malt
.5 lb 40L Crystal malt
4 oz. Carafa malt

.5 oz Cascade pellets 6.3% AA (35 min boil)
1.1 oz Nugget pellets 11.6% AA (18 min boil)
1.0 oz Columbus pellets 12.3% AA (18 min boil)
1.0 oz Columbus pellets 12.3% AA (Dryhop)
.5 oz Cascade pellets 6.3% AA (Dryhop)

WLP001 California Ale Yeast - 1L starter made

After having serious issues with stuck mashes, I decided after this one stuck that I'd just siphon the wort out of the top of the tun instead of trying to get it to run out the bottom through the false bottom. It worked admirably, as I reached about 73% efficiency which is about as good as I've gotten (75% and up is ideal). I've since decided that my problems may be due to warped plastic on the bottom of the mash tun. :( A new tun may be in my future.

My Beer Labels

Carrie gave me props about a month ago in her blog post about making beer labels, and I just got around to reading it. So in honor of that, here are the labels I've put together to date for my Revolution is Brewing Company homebrews. I use a program called paint.net, which is a free download that lets you import and manipulate picture files, draw, and add text to create really nice-looking images. I then print and tape the labels onto my bottles so I can easily remove them to reuse the bottles for future batches.Marsupium was my first attempt at making a label with paint.net. I brewed this one in late fall 2007 for my first annual Holiday Homebrew Party. It was an extract-brewed stout with 8 oz. of organic cocoa powder added to the end of the batch. The idea behind the label was that I treated it like a baby, keeping it close as a marsupial would it's young. The kangaroo is holding a basket of hop cones and cocoa beans. It was actually brewed after Chrysalis, the next label I attempted (below). Chrysalis was a very bitter (97 IBU) dry-hopped IPA, also from extract. The grassy, spring-like flavor and aroma from all that hops (Columbus mostly, some Cascade, and Nugget for bittering) inspired the theme for the label: a butterfly emerging from a hop cone-chrysalis. This one was also served at the homebrew party in December '07. Following these, I brewed a beer called Lady Fitzgerald Irish Red, in honor of my grandmother, whose maiden name was Fitzgerald. I skipped the label on this one - although I had some ideas, the beer didn't last long enough to do one, thanks in part to St. Patrick's Day. Following Lady was Hippity Hoppity, another ultra hoppy IPA much like Chrysalis, brewed around Easter, again with no label.
Then followed a long and arduous period of being too broke or busy to brew, two words I refuse to ever let sway my brewing tendencies henceforth. The reward at the end of the tunnel was Lazarus, brewed in August 2008, a big-ass strong Belgian Golden Ale brewed with extract and a shitload of sugar. Lazarus got its name from a primary fermentation that looked like it was ready to peter out after a week, then kicked in for another week, presumably when it started eating the cane and corn sugar. Raised from the dead you could say. I also liked the religious theme that it and so many other Belgians imply, though when I made this label I was teetering more towards heresy. Yes, that's Jesus being abducted by aliens in a bottle-shaped laser beam. All in good fun.
Bellona is my first real concept beer. I envisioned a full-bodied, syrupy beer with minimal bitterness or dryness, kind of a smooth yet complex elixir. I'd wanted to experiment with agave nectar, but didn't want the yeast to eat it all, so I added it to the secondary. I used a Scottish ale yeast to keep it malt-forward, some wheat malt extract as a base, malto-dextrin to keep the body up, and kept the carbonation light. Then I used a few hop varieties that were supposed to make it qualify for the September Star City Brewers Guild Competition (Glacier, Palisade and Galena). Unfortunately, I didn't realize adjuncts weren't allowable for this competition, so obviously I couldn't enter it. The label is inspired by the city "Bellona" in Samuel R. Delaney's book Dhalgren, a city where all kinds of oddballs gather and live together. Read the book and you'll get it!Next I took a couple of months off while upgrading my equipment to all-grain. In November 2008 I brewed my first all-grain batch for the December competition, a Robust Porter with a variety of malts. By all accounts it was a solid first batch that really only suffered from low carbonation at competition time. Time took care of that though. Having brewed this shortly after the Presidential Election, and itself brewed for a competition, the political theme was in my head, so I dubbed it Proletariat, a working class style (see History of Robust Porter) for the working class. Instead of a hammer and sickle, thats a crossed mash paddle and auto-siphon. The Voice of the People Series is a gimmick that will cover all of the beers I brew for competions through this year (American Brown, Saison, Oatmeal Stout and Imperial whatever).
Dreamer was my second all-grain beer, one that started out with every intention of being a strongish English export ale or special ale, but whose original gravity wound up low enough to fit comfortably in the Extra Special Bitter (ESB) category. There's a movie I won't mention that kind of inspired this, in addition to my constant daydreaming at work of someday opening a brewery. The peacock is a reference to the book Animal Dreams by Barbara Kingsolver that I read and liked in high school...seemed relevant. This one was a little rushed (trying to get it finished for Christmas which didn't happen) so it's not my favorite.
Lastly, for now, is Flora. With the homebrew shop closed the day after Thanksgiving and myself itching to brew, I turned to Patrick from the Brewers Guild to supply me with some grains. I wound up with a recipe much different from what I was intending, so I personalized it by adding some rose hips, the dried berries of rose plants often used in teas, to the end of the brew. It's very citrusy and a bit too bitter from hips and hops, but certainly its own animal, and packs a nice punch. The label theme is kind of obvious, "flora" meaning plant material, this shows a picture of some roses taken by Bailie out in our yard from last summer, a picture of hop vine leaves, and a picture of a rye plant.

Thanks for reading and please feel free to comment. I'll post new labels as they are conceived!